The radiating pad can be installed directly under the final flooring
Application: This is ideal for structures being restored, where the client would like to install underfloor heating and has a limited height. This kind of underfloor heating only requires a height of about 1.5 cm (including the insulation) in order to be installed.
Possibilities of installation:
On existing flooring
On wooden flooring
Under wall to wall carpeting or loose laid flooring
The product is supplied as: Supplied in the form of a roll and accompanied by a technical guide - manufacturing label with all the technical data, numbered according to the installation plan.
Available Standard Power: 130 W, 160 W e 200 W /m2.
Other options available by order.
Installation: The network with a type 1 resistor must be installed in a flexible layer of glue with a thickness ranging from 1 to 1.5 cm - installation in a thin layer, directly under the final flooring.
A esteira radiante fica diretamente sob o chão final.
Capturing heat that is closest to the surface decisively shortens the heat reaction time and substantially improves the regular capacity of the heating system (direct heating).
A perfect installation should only be attempted on flat flooring, i.e. flooring that has been duly levelled. This will avoid having hot points and cold points owing to irregularities in the flooring where the heating system was installed.